Luxul XAP-1500 Bedienungsanleitung Seite 4

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 28
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 3
4
XAP-1500
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XAP-1500 Vers: 07314
1 INTRODUCTION
Congratulations on your purchase of the Luxul XAP-1500 - High Power Dual-Band
Wireless Low Profile Access Point. The XAP-1500 is designed for use in residential and
commercial Wi-Fi installations—delivering optimal wireless network performance. With
this high powered, concurrent dual-band wireless access point, wireless devices that
are compatible with 802.11a/b/g/n can sustain high data rates and improved overall
performance at significantly greater distances.
The XAP-1500 features Luxul’s web based management interface. provides a simple
method for setting up the wireless network. The XAP-1500 is also enabled for instal-
lation simplicity when installed with Luxul Routers, Gigabit Switches, and other Luxul
products.
XAP-1500 Features:
Highest FCC Approved Performance (Effective EIRP 36dBm) for Farther Reaching
Signal and Maximum Data Rates
Complies with IEEE 802.11n Standard. Backward Compatible with IEEE 802.11a/b/g
Supports WMM QoS Functionality to Prioritize Multimedia Traffic
Enhanced Multi-Level Security with WPA-PSK (TKIP, AES, TKIP & AES), WPA2-PSK (AES),
WPA-PSK/WPA2-PSK Personal (TKIP & AES) and 128-bit WEP
Supports up to 12 SSIDs - 6 on 2.4GHz and 6 on 5GHz with Individual Security Settings
Multiple SSIDs Support with VLAN Tagging (1 VLAN per SSID)
Single Cable Installation with PoE (requires the use of enclosed injector)
Firmware Upgradeable
Easy 3 Step Setup through Web-based User Interface
Enabled for Maximum Compatibility and Performance with
other Luxul Products
Install on Wall, Ceiling or Desktop
1.1 Warnings
Read all installation instructions and site survey reports, and verify correct equip-
ment installation before connecting this device to its power source.
Connect all power cords to a properly wired and grounded electrical circuit.
Verify that the electrical circuits have appropriate overload protection.
Verify there is adequate ventilation around the device, and that ambient tempera-
tures meet equipment operation specifications.
Products outside the approved configurations may be in violation of Part 15 of the
FCC Rules.
Seitenansicht 3
1 2 3 4 5 6 7 8 9 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare